| Author |
|
Manwe-the-Great
Joined: 27 Jul 2006
Posts: 1
|
 Posted: Thu 27 Jul '06 3:47 Post subject: vista permissions problem |
 |
|
I don't know if this should be posted here, or on a Microsoft forum, but I figured someone else may have had the same problem.
I am installing Apache 2.2.2 on Windows Vista Beta 2 (Build 5384). At the end of the installation, I get this error message in a DOS-box:
--------------------------------------------------------------------------------------
Installing the Apache2.2 service
(OS 5)Access is denied. : Failed to open the WinNT service manager
Note the errors or messages above, and press the <ESC> key to exit.
--------------------------------------------------------------------------------------
then and error box, saying the installation was completed successfully (go figure) followed by another DOS-box saying:
--------------------------------------------------------------------------------------
[Wed Jul 26 20:45:22 2006] [error] (OS 2)The system cannot find the file specifi
ed. : No installed service named "Apache2.2".
Note the errors or messages above, and press the <ESC> key to exit.
--------------------------------------------------------------------------------------
Just started using vista a couple days ago, and never used apache for windows before (been using it under linux for several months) so I'm pretty clueless here. Thanks in advance. |
|
| Back to top |
|
pnllan
Joined: 05 Dec 2005
Posts: 221
|
| Posted: Thu 27 Jul '06 6:32 Post subject: |
|
|
I presume that you are using the MSI file from ASF for Apache 2.2.2.
Any errors showing up in the Event Viewer?
It looks like MS might have changed the Services 'back-end', if so, you might be out of luck trying to use the MSI - not sure though. Check the Apache CONF file, and make sure your paths are quoted and utilize foreslashes (ex: "C:/Apache2/conf"). Once you are sure your CONF file is well set - Try this and see if you encounter errors:
1. Open a DOS/command prompt and navigate to the bin folder under the Apache root.
2. run this: httpd.exe -k install
-k install installs Apache as a Service, so if your CONF file is error-less and it still will not install - I would say you have a compatibility issue.
..
. |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Thu 27 Jul '06 9:35 Post subject: |
|
|
| Quote: |
(OS 5)Access is denied. : Failed to open the WinNT service manager
|
That is the new security rule from Vista. Even when you login as Administrator you don't have the rights from a Administrator untill Vista ask for. It is like under Linux when you can not login as root but when you need root persmission it ask for the root password and it run programms with su / sudo.
Also there is the issue, that Vista is still beta!
Try to start Apache not as service and start it by hand in the cmd.
As pnllan said, try httpd -k install |
|
| Back to top |
|
ouchiko
Joined: 04 Sep 2006
Posts: 1
|
| Posted: Mon 04 Sep '06 13:56 Post subject: |
|
|
I've managed to get around this..
First off, the apache install tries to create the conf directories and subsequent conf files as the install progresses. Vista throws a fit and wont create the files, presum. due to permissions. If you can, grab the configuration files from a different install and copy them across.
Secondly, to install as a service you can do one of two things. a) create a bat file with "httpd -k install" and "run as administrator" on this file. or b) goto the command prompt and do
runas /noprofile /user:pcname\user "httpd -k install"
Easy huh? :@) |
|
| Back to top |
|
Jeff_wilson2000
Joined: 05 Sep 2006
Posts: 1
|
| Posted: Tue 05 Sep '06 5:55 Post subject: Same problem |
|
|
| I, too, have the same problem installing Apache 2.2.3 on Vista RC-1. I initially tried installing IIS, but I have an issue where no "Windows Features" will install correctly. I wanted to have a simple website, so I thought if I can't use the allegedly built-in HTTP server, I'd try Apache. I get the same dreaded "(OS 5)Access is denied. : Failed to open the WinNT service manager" error. Trying the suggestions in this thread were to no avail, unfortunately. Perhaps I'm just stuck until MS can figure out why I can't install IIS properly (I did submit an error report, several times). |
|
| Back to top |
|
Alessandro Vermeulen
Joined: 11 Oct 2006
Posts: 1
|
| Posted: Wed 11 Oct '06 15:20 Post subject: |
|
|
| Another method is to start the command prompt as a administrator. After that you can install the service with: "httpd -k install" or "apache -k install". |
|
| Back to top |
|
davidlt
Joined: 12 Oct 2006
Posts: 11
|
| Posted: Thu 12 Oct '06 21:17 Post subject: |
|
|
I don't have any problems installing it on RC2 (5744) of course without UAC... That thing asks even 5 times to rename folder...
I am tired of saving everything to server I want to set up everything in Vista like I did it before on XP. The problem I have, that Apache throws errors, that port is already in use. But that isn't correct, tried several different ports and every time the same. Any ideas what should I do in this situation?
I even tried lighthttpd, but it had the same problem. I don't have router, I am using ADSL, all ports are wide open, firewall is turned off right now. As I said before on Windows XP it was easy to set up and work with it. |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Thu 12 Oct '06 22:00 Post subject: |
|
|
try netstat -b to see if there is an application that listen on Port 80. Try to disable the Windows firefall and defender. Post results again!  |
|
| Back to top |
|
Jorge
Joined: 12 Mar 2006
Posts: 376
Location: Belgium
|
| Posted: Thu 12 Oct '06 23:22 Post subject: |
|
|
And uninstall skype if you have it  |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Fri 13 Oct '06 9:13 Post subject: |
|
|
You don't need to uninstall skype. You can set it to a different Port  |
|
| Back to top |
|
davidlt
Joined: 12 Oct 2006
Posts: 11
|
| Posted: Fri 13 Oct '06 12:14 Post subject: |
|
|
The only problem I was looking in Windows or Apache, tried everything and now it's Skype...  I even couldn't think that it is using 80 port... (I think this is little stupid) |
|
| Back to top |
|
davidlt
Joined: 12 Oct 2006
Posts: 11
|
| Posted: Fri 13 Oct '06 17:07 Post subject: |
|
|
Sorry for the double post, I am writing it because people won't see that there is something new if I edit my old post.
After updating to the new versions, I have some problems. Now Apache 2.2.3 + PHP 5.1.6. Any ideas why it doesn't work now?
All paths to the files are correct...
P.S. I am using manifest and new DLL for Apache from this site.
EDIT: As I can see no one knows what problem could be... |
|
| Back to top |
|
MHERRON
Joined: 06 Mar 2007
Posts: 10
Location: Metro Atlanta Ga
|
| Posted: Tue 06 Mar '07 2:39 Post subject: Re: Vista is really bad |
|
|
Ok Maybe someone out there can help me. I got Apache to install finally when I went to config httpd.conf to run php5. when I go to restart apache2 service windows wont let me it give some kinda of error like code 1 can't start service-not sure I'm currently at work and my computer is as at home. Has anyone else ran into this problem and what is the best
way to fix it please let me know 
Mike |
|
| Back to top |
|
Jorge
Joined: 12 Mar 2006
Posts: 376
Location: Belgium
|
| Posted: Tue 06 Mar '07 11:14 Post subject: |
|
|
| look in your error log for more information. It should shed more light on what exactly is wrong. |
|
| Back to top |
|
MHERRON
Joined: 06 Mar 2007
Posts: 10
Location: Metro Atlanta Ga
|
| Posted: Tue 06 Mar '07 15:50 Post subject: Ok I think I made a break through |
|
|
The problem with my httpd.conf is this little bit of code
#LoadModule php5_C:\php5\php5apache2.dll
#AddType application/x-httpd-php .php
#PHPdir "C:\php5
when this is not un commented it causes this error
Could not start the Apache2 on Local computer
So am I doucment this wrong?
It's at the end of the load module block
can someone please help thanks |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Tue 06 Mar '07 17:22 Post subject: |
|
|
I can see the error
LoadModule php5_C:\php5\php5apache2.dll is wrong!
that must
LoadModule php5_module "C:\php5\php5apache2_2.dll" |
|
| Back to top |
|
MHERRON
Joined: 06 Mar 2007
Posts: 10
Location: Metro Atlanta Ga
|
| Posted: Tue 06 Mar '07 17:42 Post subject: |
|
|
will the rest of it work correctly?
| James Blond wrote: | I can see the error
LoadModule php5_C:\php5\php5apache2.dll is wrong!
that must
LoadModule php5_module "C:\php5\php5apache2_2.dll" |
|
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Tue 06 Mar '07 18:16 Post subject: |
|
|
yes it is!
| Code: |
LoadModule php5_module "C:\php5\php5apache2_2.dll"
AddType application/x-httpd-php .php
PHPdir "C:\php5
|
there is also another way to find that out: trial and error ^^ |
|
| Back to top |
|
MHERRON
Joined: 06 Mar 2007
Posts: 10
Location: Metro Atlanta Ga
|
| Posted: Wed 07 Mar '07 12:42 Post subject: Re: Still not working |
|
|
Trial an Error has led to frustartion
But the good news is I know what Line is Causing it maybe some one like MR. Bond can show me what is wrong
The error it gives is:
it gives a syntax error on line 117 of httpd.conf
Invalid command 'PHPdir' , perhaps misspelled or defined by module not included in server configuration
the line that it refers to is PHPdir "C:\php5
I am running Window Vista and Have given full permissions to php5
any ideas? thanks for the help |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7371
Location: Germany, Next to Hamburg
|
| Posted: Wed 07 Mar '07 15:29 Post subject: |
|
|
Whoops!
I forgot a Quote (") after PHPdir "C:\php5 that must be PHPdir "C:\php5" |
|
| Back to top |
|
